
Changing your cleaning contractor mostly comes down to planning. Done properly, the new team starts the day after the old one finishes; there is no gap in service, and nobody in the building notices anything except that standards improve.
Two main factors can cause disruption: serving notice too late and underestimating TUPE. Both are avoidable with correct timing.
Key Insights: What’s involved in changing cleaning companies?
- Check your cleaning contract first, particularly the notice period and any auto-renewal clause.
- Expect the process to take two to three months.
- TUPE usually applies, so the existing cleaners normally transfer to the new contractor.
- Employee liability information is due at least four weeks before the transfer.
- Write the specification before you go to market.
- Agree the handover details and the first audit date before day one.
Start With Your Cleaning Contract Notice Period
There is no standard notice period for a cleaning contract. Three months is common; some are one month, and some are longer. Yours should be written in the contract you signed.
Six things to look for before you do anything else:
- The notice period itself and whether it is expressed in calendar months or a fixed number of days.
- How notice has to be served. Many contracts require written notice to a named address or director. An email to your account manager might not count.
- Any minimum term still running, and when it ends.
- Break clauses and what triggers them. Some contracts allow early exit for sustained underperformance, provided you have first followed a defined process.
- Early termination charges, including any clawback of equipment or mobilisation costs.
- Auto-renewal often catches people out. Many cleaning contracts roll over automatically for a further term unless notice is given by a specific date. If you miss that date, you might be committed for another year.
Read the contract properly before you start talking to anyone else. If a clause is ambiguous or you’re not certain when or how notice has to be served, take proper advice before serving it. Getting this wrong is the most expensive mistake in the whole process.
Does TUPE Apply When You Change Cleaning Company?
Usually, yes. TUPE, the Transfer of Undertakings (Protection of Employment) Regulations, covers changes in service provision. Those include a contract ending and being given to a new contractor, an in-house service being outsourced, and a contract ending with work returning in-house.
In practice, that means the cleaners currently working in your building normally transfer to the incoming contractor on their existing terms and conditions. They keep their pay, continuity of service, and contractual terms. They do not start again as new employees.
Three things to be aware of:
It is not optional. Where TUPE applies, it applies whether or not anyone involved wants it to. It is not something a client and a contractor can agree to set aside.
Dismissals connected to the transfer are automatically unfair. Just bringing in a fresh team is not a plan, and if a contractor suggests it, this tells you something useful about how they operate.
It usually works in your favour. Most clients assume a switch means losing the people who know the building, but TUPE is what keeps them there. The cleaner who knows which bins fill fastest and which meeting room gets missed stays on site under new management, with a proper specification behind them.
Whether TUPE applies to a particular arrangement depends on the facts. Ad hoc or one-off work may not be covered, and the position is not always obvious. Take advice rather than assume, either from ACAS or from an employment solicitor.
Note: TUPE is under review. The Department for Business and Trade ran a call for evidence between April and July 2026, covering, among other things, whether it is clear when TUPE applies to service provision changes. No changes have been made, and the current rules still apply.
What TUPE Means for Your Timeline
One requirement drives everything else. The outgoing employer must provide the incoming employer with employee liability information at least four weeks before the transfer. That covers each employee’s name and age, the key terms of their employment, any disciplinary action taken or grievances raised in the previous two years, any legal action brought in that period, and any the employer expects might follow.
On top of that, there are obligations to inform and consult the affected employees about the transfer.
This is why what looks like a two-week job is realistically a two- to three-month one. The most common cause of a disrupted handover is a client who served notice, assumed the rest would follow, and then discovered that four weeks of the notice period had already been spoken for.
How to Switch Cleaning Contractor: A Timeline
| When | What happens | Who leads |
| 12+ weeks out | Read the contract. Confirm the notice period, how notice must be served, and any auto-renewal date | You |
| 10 to 12 weeks | Write the specification: areas, tasks, frequencies and standards | You |
| 8 to 10 weeks | Go to market, evaluate on specification rather than headline price, select a contractor | You |
| 8 weeks | Serve notice exactly as the contract requires | You |
| 4+ weeks before the transfer | Employee liability information passes between contractors | Outgoing contractor |
| 4 weeks | Inform and consult the affected employees | Both contractors |
| 2 to 3 weeks | Site survey, induction planning, risk assessments and COSHH | Incoming contractor |
| 1 to 2 weeks | Keys, alarm codes, access arrangements, consumables stock check | Both contractors and you |
| Handover day | Old contract ends, new one begins, equipment on site | Incoming contractor |
| Week 2 to 4 | First audit against the specification | You and incoming contractor |
The timeline runs backwards from the transfer date rather than forwards from the day you decide to change. Work out when you want the new contractor to start, then count back. If the arithmetic shows you have already missed the auto-renewal date, it is better to discover that now than in three weeks.
The Practical Details That Cause Disruption
The things that actually go wrong on handover day are mundane, which is why they get missed.
- Keys, fobs and alarm codes: Who holds them, who returns them, who issues the new set, and when the codes change. Agree this in writing with a date.
- Out-of-hours access: Who the keyholder is, and whether the alarm company has been notified of a new one.
- COSHH storage: The outgoing contractor’s chemicals leave with them. The incoming contractor’s chemicals need somewhere compliant to live from day one.
- Consumables stock: Whose soap, paper and bin liners are in the cupboard, and whether there is enough to cover the changeover.
- Equipment on site: Some of it may be yours rather than the contractor’s. Establish which before it goes in a van.
- Parking, loading and lift access, particularly for out-of-hours or weekend work.
- Induction: The incoming team should know your site rules, restricted areas and reporting lines on the first day.
An outgoing contractor working its notice may have little commercial incentive to maintain standards, and the last fortnight of a contract is where buildings can slip. Agree in writing what the final weeks should look like, and audit them the same way you would any other period.
What to Agree Before Day One
Agree on four things in writing before the new contract starts:
The specification, covering what is cleaned, in which areas, and to what result.
The frequency of every task, from each visit through to annually.
How performance will be audited, in what format, and how often.
A review date in the first month, booked before anybody starts. Setting a review date in the first month supports a structured rollout and provides an opportunity to address any early issues.
Related reading: The UK Commercial Cleaning Standards Guide
Should You Switch, or Fix What You Have?
Most underperforming contracts recover once there is a written specification, a record of what has been done, and a review date with someone’s name against it. If none of those three things exists, the problem may be with the arrangement rather than the contractor, and switching may just reproduce it.
Switching is usually the right answer when performance does not improve after a fair, documented attempt, when the contractor cannot produce the basics on request, or when the relationship has run its course.
Related reading: Six Signs Your Cleaning Contractor Is Underperforming
Changing Cleaning Company FAQs
How do I change my cleaning company?
If you’re thinking of changing your cleaning company, start by reviewing your current contract to confirm the notice period and how notice should be served. Write a specification for what you actually need, go to market against that specification, select a contractor and then serve your notice. Allow four weeks within the notice period for the TUPE process, and agree the handover details before day one. Two to three months end-to-end is realistic.
What notice do I need to give to end a cleaning contract?
It depends on your contract. Three months is common but by no means universal. Check the notice period itself, how notice must be served and to whom, whether any minimum term is still running, and whether it renews automatically if notice is not given by a particular date. If any of it is unclear, take advice before serving notice.
Does TUPE apply when changing cleaning contractor?
Usually, GOV.UK confirms that TUPE covers service provision changes, including a contract ending and being awarded to a new contractor. Where it applies, the cleaners working on your site normally transfer to the incoming contractor on their existing terms. Whether it applies in a specific case depends on the facts, so take advice from ACAS or an employment solicitor rather than assuming either way.
What is a service provision change?
It is one of the two types of transfer TUPE covers. It includes an in-house service being outsourced to a contractor, a contract ending and being given to a different contractor, and a contract ending with the work being brought back in-house. All three are common in commercial cleaning, which is why TUPE comes up so often in this sector.
How long does it take to switch cleaning contractor?
Two to three months is realistic for most commercial sites. The notice period sets the outer limit, and within it you need four weeks for employee liability information to pass between contractors, plus time to inform and consult affected employees, plus a week or two for site survey, induction and access arrangements. Sites with security clearance requirements or complex access can take longer.
What is employee liability information?
Employee liability information is the information the outgoing employer must provide to the incoming employer at least four weeks before a TUPE transfer. It covers each employee’s name and age, the key terms of their employment, any disciplinary actions or grievances in the previous two years and any legal action brought in that period or that the employer expects. It allows the incoming contractor to plan efficiently.
Will my cleaners change if I switch contractor?
Often not. Where TUPE applies, the cleaners already working in your building normally transfer to the new contractor rather than being replaced. What changes is the management, the specification, and the standard they are working to. For most sites, that is the best of both outcomes: the people who know the building stay, with better support behind them.
Can I change cleaning company mid-contract?
It depends entirely on what your contract allows. Some include break clauses that can be triggered by sustained underperformance, usually after a defined improvement process. Others run to a fixed term with early termination charges attached. Read the contract, follow any process it sets out, and take advice if you are considering exiting before the end of a term.
Changing contractors is straightforward when planned and disruptive when rushed. If you are weighing it up, the first useful step is to specify what your building actually needs, which gives you something to quote against and something to measure afterwards.
MCS Cleaning has handled TUPE transfers, plans mobilisation before day one, and employs its cleaners directly with absence covered internally. We work with offices, schools, warehouses and healthcare settings across the East Midlands, Leicestershire and Berkshire.

